A broken drag link can result in a loose steering wheel, uneven tire wear, and other problems. You need to replace the drag link to prevent this from happening. Fortunately, replacing a drag chain can be done fairly easily. If you have a Craftsman mower, follow these steps to replace the drag chain. Read on for instructions.
Here are some ways to do it. Often, you’ll need to replace the drag link on a Craftsman riding lawn mower because it has a steering mechanism fault. This problem is usually caused by a worn-out drag chain, also known as the steering link. In such a case, you’ll have to replace the drag chain, which is a simple repair. Remove the fuel tank to get access to the steering supports. Next, remove the bolts that secure the drag link to the steering support.
When you replace a drag chain on a Craftsman lawnmower, you’ll have to adjust the steering wheel’s angle to prevent it from slipping. The steering wheel alignment will need to be adjusted after replacing the drag chain. (johnsbrotherssecurity.com) This is a necessary step if you want your steering wheel to be straight.
If you can’t find the steering support bolt, you can try to unscrew it first. If your Craftsman riding lawn mower is having trouble steering, the problem is most likely with the steering mechanism, also known as the drag link. A faulty drag chain will cause the steering wheel to vibrate or play. Fortunately, it’s easy to replace a drag chain on your Craftsman lawn mower if you’re skilled enough.
Remove the fuel tank to gain access to the steering support. You can then unscrew the steering support bolts. Using a wrench, remove the gas tank on your Craftsman riding lawnmower. Then, remove the fuel tank. Then, use a 3/8-inch socket wrench to unscrew the bolts holding the steering support.
Then, unscrew the steering support to gain access to the drag link. From there, you can easily replace the drag link on a Craftsman lawnmower. A worn-out drag link will cause a Craftsman lawnmower to have a hard time steering. The new drag chain should be installed to avoid further problems. Ensure that you have a wrench to replace a drag-link on a Craftsman lawn mower. Afterwards, you should align the steering wheel with the new drag chain.
Then, replace the drag link on the craftsman riding lawn mower. A worn-out drag link will affect the steering of a Craftsman lawnmower. It will make the machine difficult to steer and may affect the finish of the turf. Replacing the drag-link will improve the steering and handling of the Craftsman riding lawn mower.
By following these steps, you will be able to replace the drag-link yourself and prevent further problems. A worn-out drag link will make the Craftsman lawnmower difficult to steer. It will also affect the cut quality of the turf. In order to replace the drag-link, you should remove the fuel tank and the steering support.
After this, you should remove the bolts that hold the steering support in place. Now, you can take care of the drag-link by yourself. If you don’t have the right tools to repair your Craftsman lawnmower, you can replace the drag-link yourself. You’ll need a socket wrench to remove the hood and the fuel tank, but you can also remove the entire engine and the steering tank to gain access to the drag-link. Then, you can easily take out the fuel tank.